Kawasaki Ninja 250R Forum banner

Powder Coating Rims

3805 Views 4 Replies 4 Participants Last post by  AZPRIMEMINISTER
Im going to be purchasing a 2008 Ninja 250 in the plasma blue color with just under 900 miles from a great friend of mine, the bike is 100% stock and I want to change that. Im thinking about doing a blue on white color scheme.

What do you guys think about white powder coated rims?

Or any other color suggestions that would look sick. Thanks!! :righton
1 - 1 of 5 Posts
its relatively easy to get your rims powder coated but not cheap i used to powder coat huge pipes and the process was simple they welded, cleaned, sand blasted, powder coated(1 coat primer, 1 coat clear, 3 or 4 coats of color chosen and 1 more coat of clear) all while baked in the oven at 500 degrees between each coat. but remember this was the process for us i dont know what it is for rims.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.