Kawasaki Ninja 250R Forum banner
turn
1-20 of 34 Results
  1. Technical
    my friend just added new fairings to her 250 and says the bike wont turn on at all as in no power what so ever. only things that were unplugged were the tachometer and they are all hooked up right. what could be wrong with the bike?
  2. Buy / Sell / Trade
    Looking for a right side, or a pair, of OEM turn signals for my 2007 250 Ninja. Thanks. deandeib Southeast PA
  3. Classic Ninja 250
    Getting my 2006 back on the road. Tires, chain and the other stuff no problem. The turn signal stalks have decomposed, being cheap rubber and garage storage. They are Stanley P5152 part but don't know if that is the rubber itself or the whole signal. Kawasaki parts doesn't list them alone...
  4. Technical
    I recently installed some rear LED turn signals along with a new flasher unit on my 2012 Ninja. All the turn signals work fine like they should until about 2 weeks ago. My left two turn signals(front and rear) work perfectly but when I have my right turn signal on it works perfectly until I rev...
  5. Technical
    i get no power to my ignition oil light or neutral light on console and having problems diagnosing where short is, turn signal work but i can figure out the problem 1ST Time here
  6. Modifications
    Okay I know what your say, "not another flush mount that doesn't even come close to fitting the OEM area" Well if you've been here awhile, then you've heard the tales of the old AsianCycle flush-mounts, and how great they where, but like so many great accessories for our beloved 88~07 Ninjas'...
  7. Classic Ninja 250
    Howdy y'all! I have myself thoroughly stumped here. None of my turn signals work. when I hit the switch nothing happens, no dash indicator, no turn signals no nothing. I already checked the fuses, bulbs and cleaned the switch connection. bike is a 2001 ex250 with about 29k miles. Thanks for...
  8. The New Ninja 250
    After my bike sitting for a month, my bike wont start and no headlight turn on, battery no problem, had jumpstart from my car but it wont start also. Could the problem from headlight relay, anybody facing the problem? Need help ... Sent from Motorcycle.com Free App
  9. Technical
    On my 2007 ninja 250 the turn signal bulb is out. I replaced the bulb and even switched it with the other side (front turn signal) and still won't work. I was wondering if anyone has had a similar problem that might narrow down the troubleshooting.
  10. Modifications
    Having trouble locating where to connect the wire from my alarm to the turn signals in my bike.. Anyone got an idea what color wire I'm looking for on my bike to connect it to? It's a 2008 250. Thanks for looking.. Sent from Motorcycle.com Free App
  11. Classic Ninja 250
    So, I'm sorry for my first post to be asking for help, but I don't know what else to do with my problem. I recently bought an 05 ninja 250, for cheap. It has been down at least a few times. pretty much every fairing was busted in a few spots. Only had one turn signal(rear) needed a front tire...
  12. Classic Ninja 250
    Salute guys I bought a project ex250 and I'm having a few issues I'm 17 so my engine knowledge aren't on par with you older gentlemen so if needed detailed descriptions will be apreciated I have connected all wires I have seen that needs to be with only the flicker lights unplugged I don't know...
  13. Buy / Sell / Trade
    I am looking for the front turn signal bulb to my 2009 250r, the model is bau15s. Anyone have an extra handy?
  14. Technical
    So, the prior owner of my new 250 destroyed the front fairing and shattered one of the front turn signals. As such, I want to trade out the turn signals for some LED turn signals. I already picked out the turn signals...
  15. The New Ninja 250
    For those who look to replace their stock turn signal bulbs once the time comes, Kawasaki lists the stock turn signal bulb (for the 250, 300, 400, 650) as 12v 10w, p/n 92069-0024, but does not list a U.S. bulb number (i.e 1157), that's because it is a European bulb. RY10W or an Osram 5009...
  16. Classic Ninja 250
    Hey, new user to the forum here, I've got a 2004 Ninja, and I'd like to flush mount my turn signals, and I noticed two small panels next to the taillight. So, curiosity got the better of me and I opened them up, and discovered these sockets. So I figured, why not stick my turn signals in...
  17. Modifications
    This model 250's front turn signals stick out pretty far, and I wasn't very fond of them. I looked everywhere for Asiancycle flushmounts, but found out they weren't being made anymore. But I found some on ebay exactly the same style. Here are the ones I'm going to install The ones I'm...
  18. Buy / Sell / Trade
    I need a right front turn signal for a 2006 ninja. My bike inspected with the one on it but the tech told me that since it has a crack in it I should get another one. Let me know what you have.
  19. North East
    I need a right front turn signal for a kawasaki ninja 250 2006 model. If you have one let me know.
  20. Technical
    Does anybody know how much resistance the stock bulbs from the rear turn signals take ?? Any help would be great Sent from my iPhone using MO Free
1-20 of 34 Results
Top