Kawasaki Ninja 250R Forum banner
shift
1-11 of 11 Results
  1. Technical
    I upgraded my front sprocket (15 teeth) and reassembled everything. On my next drive to my horror I discovered that I can no longer shift above 2nd. The bike will still go into neutral.
  2. Technical
    Ok so by the kick stand are there is a part I can't find on the Kawasaki owners PDF files. It is hardwired in has a bump pushpin to bolt holes on each side. if anybody knows what this is or where it goes that would be great I'll try to include a pic. Also I got this 04 ninja 250 on a straight...
  3. Modifications
    I was looking into the Factory Pro Blue Magic Spring which helps with false neutral, and gear selection problems. It's a stiffer spring in short. http://www.factorypro.com/Prod_Pages/prodk14.html From the Factory Pro website The price is what I have an issue with, also from the Factory...
  4. New Riders
    Hey everyone! I'd like to replace the shift pedal on my bike. I'm not sure where to get a new one. Any one have suggestions on where I can get a new shift pedal? Is it really hard to replace? Thanks!
  5. Technical
    I recently replaced my shift peg with a brand new one but am having trouble shifting into gears..It's very stiff and won't shift down at times.
  6. Technical
    I have a Ninja 250R. Today, I rode my bike for about 20 miles and it was completely fine. I then washed the bike and drove for three miles. I turned the bike off and left it alone for 15 minutes. When I turned the key it would not start. The battery had power, yet it would not turn over, only...
  7. Buy / Sell / Trade
    WTB: '08-'12 Shift & Clutch Levers! Just bought a '12 EX250 with only 100 miles that had fallen over in the driveway, need these in excellent / near perfect condition (both in black): Shift Lever - need only the actual lever, don't need the entire shift linkage / rod (I'm assuming I can just...
  8. Technical
    A bit different from the thread below me, haven't seen anything like it. I was riding in the fog and someone pulled out in front of me, locked up the brakes and went down. I had frame sliders on, however the shifter still caught the ground and managed to bend ALL the way back until it hit the...
  9. Buy / Sell / Trade
    Looking for a shift pedal for a ninja 250r 2008. shipped to 64052. Email [email protected]
  10. Technical
    2007 10K miles resists downshifting into first from second. Coming to a stop I engine brake down into second. After the stop, I try to shift into first to get rolling again, but it's taking 3 or 4 tries before it'll go. I have to really kick it down or start (jerkily) in second. Just had...
  11. Maintenance
    Hi Folks This morning, as I was shifting from gear two to three I experienced the horror of broken gear shift lever. To clarify, the shift lever itself does not seem broken but the bolt that joins the gear shift lever to the spline went MIA. I had changed up into third gear and the lever...
1-11 of 11 Results
Top