Kawasaki Ninja 250R Forum banner
brake
1-20 of 20 Results
  1. Modifications
    So I am considering modifying the brakes on my 08 a bit, but I don't know much about it. I'm planning on switching to Galfer braided lines, but other than that I'm not quite sure what else to modify. Should I switch to a certain brand of brake pads or replace anything else in the braking system...
  2. Technical
    Just washed my bike today, upon inspection later on I found that the brake light doesn't switch on when either brake lever/pedal is depressed. I have no clue what could be wrong, I also found that some water had gotten under and into the rear seat while I was washing it earlier. I guess what I'm...
  3. Buy / Sell / Trade
    $100 shipped. I never used it but I know it was used on an rc51. It's in good shape just don't have a use for it. Sent from Motorcycle.com Free App
  4. Buy / Sell / Trade
    Like the title says, interested in a clean (no rips) 08+ seat and the spring for the rear brake switch. Let me know what you have!
  5. Technical
    Hi all so i have an issue with my rear brakes. At first the brake pedal was actually sticking it wasn't fully locked though because when i first noticed it on the way to work i pulled over and still could roll the bike just with increased resistance. When i got on the bike after work it had...
  6. Technical
    with the stock brake light plugged in brake light functions like normal. with the led one plugged in, it lights up like the brake is being applied even if its not. checked the rear brake light switch, not an issue ( being as the brake light works with the normal light) any ideas? Im stumped...
  7. The New Ninja 250
    Any recommendation or review about it? I'm looking to get a Brake Light's Flasher ( Module?) Which one to get & how much is it? Anyone?
  8. Modifications
    modmy250.com has a plug and play brake light modulator. They flash quickly 6 times and then stay steady. If you pull on the brake again within 10 seconds, they remain in a steady state. This is to keep from annoying the people behind you if you are in slow moving traffic. After 10 seconds...
  9. The New Ninja 250
    I recently ordered an Arashi brake rotor for my 08 250, but it seems way too thick to actually work, am i going to have to buy an aftermarket brake pad too? And i also received an extra piece with the rotor, and am not sure what it is... Please help! Thanks alot
  10. Modifications
    Hey guys just curious as to which is the favorite or most reliable fender eliminator kit? I'm wanting to get rid of the stock plastic on the back and have an integrated brake light that has turn signals as well so I can do away with the stock knobs on the back. Seen a couple on MCSS but not...
  11. Classic Ninja 250
    On my 2007 250R the brake light is housed in a sort of three-sided plastic enclosure. The center compartment contains the actual brake light. The two ancillary compartments (both covered by a red lens, like the center) are clearly designed to hold bulbs, although there are no sockets or wiring...
  12. Technical
    Ok so Ill start by saying Im a rookie at fixing bikes. Wrecked my bike a couple months back and working on putting it back together. Its an 09' Ninja 250R. Today I replaced the right stay step holder. First problem.. there are 2 springs behind it.. on big one wich i connected to the nob with...
  13. Technical
    I need to know the manufacturer of my front and rear brake calipers on my 2008 Kawasaki Ninja 250R. Are they made by Tokico or Nissin? Thanks Mylar
  14. Buy / Sell / Trade
    This is a Rear Brake Resivoir Cover for your Ninja 250r. This will cover that Horrid, Out of place brake fluid at the back of your bike. They are Made from Fibre Glass - But you can have Carbon Fibre at Special Request. The price for Fibraeglass is $25 - Matt Black as standard (Buy from this...
  15. The New Ninja 250
    Posted under "maintenance" but will add here..besides removing the 2 12mm caliper bolts up front, don't I need to remove the 2 allen bolts to remove/replace the pads ? THX
  16. Technical
    My bike just hit the 1600 mile mark (in 6 weeks) and for the last few hundred miles, I have noticed that the front brake has started to squeel. I have not been very hard on the brake or the bike either. Any thoughts?
  17. Technical
    hi everyone i know this may not be a maintenance issue or whatever but i'm in dire need of help. i dropped my bike tonight on its right side and it broke the front headlight and broke the tip of the right brake clutch. I'm so sad...are these replaceable??? If so how much do they cost? any...
  18. Maintenance
    Can't find the front brake pads anywhere locally not even the aftermarket ones. I tried Chapparal Motorsports, Corona Motorsports, Hahm, and Cyclegear. Even sellers online don't have them. Any ideas where I can get it fast or locally in stock.
  19. Maintenance
    I was wondering what the typical life span of the brake pads are. I mean they are soooooooooo tiny compared to cars, and i think my fronts are starting to squeek. Should i blast some brake cleaner on? or should i look into replacing them. I know that the fronts will get more worn out than the...
  20. The New Ninja 250
    I did a quick search for SS brake lines for the new 2008 ninja 250R (zx250r) and found that Galfer actually makes them. On my old 2002 250r, brake fade was extremely annoying and down right dangerous at times. Galfer part number: Front Line: FK003D674 Rear Line: FK003D674R
1-20 of 20 Results
Top