|Topic Review (Newest First)|
|02-25-2013 05:46 PM|
|Mxslick||Yeah your LED strips aren't drawing enough power for even the electronic relay to work properly. You have a few choices: One, try to double up each side's LED strips to draw more..or get regular aftermarket LED turn signals and install those in addition to (or better instead of) the existing strips.|
|02-19-2013 11:35 AM|
|Team Prime||So i got an electric flasher relay and it still didn't change anything any other thoughts?|
|02-18-2013 01:01 PM|
|DaBlue1||Check this website for all your Ninja 250 LED needs. http://modmy250.com/LP.html|
|02-18-2013 12:06 PM|
|Team Prime||Ok that makes sense... so i wire the flasher unit in place of the blinker relay.. I'll give it a try Thanks|
|02-16-2013 11:19 AM|
It's the LED's.
Since you've got LED's, you need to install an electronic flasher. They run about $4-$8 at your local auto parts store. Just make sure it has connections for two wires (power and ground).
The stock flasher is not electronic and will work improperly whenever LED's are hooked up
100% free webcam site! | Awesome chicks and it is absolutely free! | Watch free live sex cam - easy as 1-2-3
|02-16-2013 08:04 AM|
I've got a 2008 ninja 250...i bought the bike needing some fairings to be replaced and painted so i took them off and also got rid of that big license plate bracket so i wired in led strips for rear blinkers looks great and worked great but when i plugged the dash back in now all 4 blinkers just come on and stay on...i think my relay was bad when i bought the bike cause they didn't blink so i put a new one in and still all come on and stay on as soon as i unplug the dash one side comes on at a time but still doesn't blink...could it by any chance be my switch idk it just doesn't make sense