Could this be one of the mixture screws?
Whats up everybody. Im a new rider who recently bought a 2003 ninja 250. I have ridden lots of cruisers but this is my first street bike so I bought something small so I wouldnt kill myself lol. Anyway, I am almost mechanically retarded, but I go real interested in the mechanics of my bike and wanted to start learning about it myself.
Just in the last 2 weeks I was able to read and completely torn down my bike, clean the carbs, change the oil and oil filter, and reroute some hoses that were acting up. I was able to get it all back together, but since I have, I have noticed misfiring from the exhausts when at high rpms when its not moving. And also after I let off the throttle it drops to about 3000 rpms then takes a couple seconds to get back down to idle range. I have a feeling its the idle mixture screws from what I was reading, but any help would be appreciated. I have a clymers manual and a manual from cyclepedia and have also printed out a lot from the ninja 250 wiki. Thanks Guys
Info about bike
Model: Ninja 250
If you would like any other information or specs please let me know.