New to forum doing a complete rebuild
Hi everyone i am in some major need of help. I bought a 1989 ninja 250 with a bad ignition no key or ignition and is a complete basket case. I purchased a battery and installed. I was able to jump the engine off the relay and it turns over good sign. Now i bought a key that was suppossed to work but plugged in and nothing and there was a extra brown wire on it than on my harness. I am making this bike into a cafe so i really dont care about the key. Where do i start to confirm im getting power to ignition plug in. Can someone help me on just wiiring in a switch so i can confirm everything works before i completely tear down bike for paint etc..If you can help me message or post and help me get i the right direction on this.