Join Date: Jun 2013
Location: Hampton, Va, USA
Turn signal issues. running light mod.
So, I'm sorry for my first post to be asking for help, but I don't know what else to do with my problem.
I recently bought an 05 ninja 250, for cheap. It has been down at least a few times. pretty much every fairing was busted in a few spots. Only had one turn signal(rear) needed a front tire and a battery, but did run, and didn't have a ton of miles.
I got most of it fixed, and now I am working on turn signals... I am still waiting on parts for the rears, putting them in the side pods of the tail, and I bought some ebay china flushmounts for the front.
They have 3 wires, red, black, and black/white. I figure the 3rd is for running lights, and they do have dual fil. bulbs. I wired the black/white into the red/blue stripe wire from the harness to the instrument cluster, and the black to the black/yellow(or whatever color that other wire is) and the red to the green for hot.
When I start the bike, both lights light up....but one is on the brighter filament, and the other is on the dimmer filament...and the turn signal switch doesn't do anything....
Anyone got any advice?