Installed the Proton flush mount signals in my 2010 Ninja 250. Instructions did not said anything about changing the relay to electronic, so the stock rear signals didnt work. Got a cylinder shaped grey smoke plastic relay from PEP BOYS and that solved the problem. Today I started installing the HOTBODIES undertail, connected all wires and this is where I am. Tail light works, licence plate light works, Turn on the turn signal either left or right, all four turn signals lite up at the same time. I don`t now anything about wiring bikes, but I`m thinking maybe the new relay isn`t capable of handling the LEDs of the four turn signal lights? If anybody could help, that would be great. Thank you forward for your time.