I need directions on how to remove my seat so I can access the battery.Im preparing for my HID install and need to upgrade 2 fuses.I dont know where the hell I put the bikes manual. Thanks for the help.:notworthy

remove the black side covers by unscrewing the screw and pulling straight out ( there are three "buttons" left holding it). Then one screw on each side of the seat. Slide seat towards rear of bike and out.

remove the black side covers by unscrewing the screw and pulling straight out ( there are three "buttons" left holding it). Then one screw on each side of the seat. Slide seat towards rear of bike and out.

sweet thanks.......

You must first remove the side covers with a metric hex key.That presenting two screws holding the back seat on either side.You will see the fuse box and tray.Wiggle it around and carefully lift the battery is below.